东莞同亿工程塑料有限公司长期供应工程塑料:HOSTAFORM C9021,SABIC Cycoloy ,IUPILON , Multilon ,Lupoy ,Noryl ,XYRON ,Iupiace,VALOX , CCP PBT ,Leona,Grilon,EKONOL,VECTRA,Zytel HTN,DURACON,FORMOCON,Grivory,Ticona,Hostaform,CELCON,Ultraform,AMILUS,Iupital,AMODEL,Zenite,Ultramid,Polyone,ARLEN,Kuraray,Akulon,Durethan,Stanyl,CELANEX,AMILAN,GRILAMID,UBE,Ryton, FORTRON,FORTRON,DIC,KUMHO,Novamid,Luran,Rynite,Zytel,MINLON,Homo polypropylene,Impact polypropylene,Random polypropylene,Glass Fiber,Talc,FDA food contact,SABIC LEXAN ,Bayer Makrolon ,Teijin Panlite ,M-EP ,LG-Dow Calibre ,Kotex ,Touflon ,PC+POLYESTE(PC/PET),SABIC Xylex ,PC/PBT ,Bayblend PBT/PC ,SABIC Xenoy, SABIC VALOX ,DURANEX , Cycoloy ,IUPILON , Multilon ,Lupoy ,Noryl ,XYRON ,Iupiace , VALOX , CCP PBT ,Leona,Grilon,EKONOL,VECTRA,Zytel HTN,DURACON,FORMOCON,Grivory,Ticona,Hostaform,CELCON,Ultraform,AMILUS,Iupital,AMODEL,Zenite,Ultramid,Polyone,ARLEN,Kuraray,Akulon,Durethan,Stanyl,CELANEX,AMILAN,GRILAMID,UBE,Ryton ALL plastic resin grades及各种食品级工程塑料,玻纤增强工程塑料,碳纤增强工程塑料,矿物增强工程塑料,阻燃工程塑料,抗紫外线、抗静电、导电、增韧、耐寒改性工程塑料.
 
 
 
Dupont ZYTEL    
     
1、Blow Moldable Resins
--------------------------------------------------------------------------------
Zytel® BM70G15HSLR BK537 15% Glass fiber reinforced polyamide 66 for blow molding
Zytel® BM70G20HSLX BK537 20% Glass fiber reinforced polyamide 66 for blow molding
Zytel® BM7300THS BK317 Unreinforced, PA6 blow molding resin
Zytel® CFE8005HS BK010 Blow moldable, Super Tough nylon 66 resin
Zytel® FE240012 BK010 Highly toughened, heat stabilized polyamide 612 for extrusion, blow molding or processing by other techniques requiring high melt viscosity.
2、Color Stable Resins
--------------------------------------------------------------------------------
Zytel® ST801A NC010A Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure.
3、Encapsulation Resins
--------------------------------------------------------------------------------
Zytel® FE5382 BK276 33% Glass fiber reinforced, heat stabilized, black polyamide 612 resin developed for electrical bobbins and encapsulation applications
4、Extrusion Resins
--------------------------------------------------------------------------------
Zytel® 101 NC010 General purpose polyamide 66 resin for injection molding and extrusion
Zytel® 153HSL NC010 Lubricated, heat stabilized, extrusion grade
Zytel® 157HSL BK010 Lubricated, heat stabilized, improved weather resistant molding/extrusion grade
Zytel® 158 NC010 General purpose PA 612 resin suitable for molding and extrusion applications
Zytel® 158L NC010 Lubricated, general purpose molding/extrusion grade -- a higher melt viscosity than Zytel® 151L NC010
Zytel® 159 NC010 High viscosity, extrusion grade
Zytel® 159L NC010 Lubricated, extrusion grade
Zytel® 42A NC010 High viscosity polyamide 66 resin for injection molding and extrusion applications such as film and tubing
Zytel® 45HSB NC010 High viscosity, heat stabilized polyamide 66 resin for injection molding and extrusion applications such as film and tubing
Zytel® 7301 NC010 General purpose, unlubricated polyamide 6 resin for extrusion applications.
Zytel® 7304 NC010 Medium viscosity, unlubricated polyamide 6 resin for extrusion applications.
Zytel® E51HSB NC010 High molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion
Zytel® FE2400 NC010 High viscosity polyamide 66/6 copolymer resin
Zytel® FE240012 BK010 Highly toughened, heat stabilized polyamide 612 for extrusion, blow molding or processing by other techniques requiring high melt viscosity.
Zytel® FE3071 NC010 Intermediate viscosity polyamde 66 resin for injection molding and extrusion
Zytel® FE310001 NC010 High viscosity polyamide 612 resin that is suitable for extrusion applications, such as monofilaments and tubing
Zytel® FE310064 NC010 A polyamide 610 resin
Zytel® FE310065 NC010 A polyamide 610 resin
Zytel® FE4200 BK136 Toughened, heat stabilized Nylon 66 resin for extrusion
Zytel® FN727 NC010 Graft ionomer modfied nylon 6 resin. Flexible, nonplasticized.
Zytel® ST811HS NC010 Rubber modified nylon 6 resin. Very flexible.
5、Flame Retardant Resins
--------------------------------------------------------------------------------
Zytel® FR50 BK505 25% Glass reinforced, flame retardant black PA66
Zytel® FR50 NC010A 25% Glass reinforced, flame retardant PA66
Zytel® FR7025V0F NC010 Unreinforced, elemental phosphorous and halogen free
Zytel® FR7026V0F NC010 Unreinforced, elemental phosphorous and halogen free flame retardant PA66
Zytel® FR70M30V0 BK010 30% Mineral reinforced, flame retardant, black polyamide 66 resin for injection molding
Zytel® FR70M30V0 NC010 30% Mineral reinforced, flame retardant polyamide 66 resin for injection molding
6、Glass/Mineral Reinforced Resins
--------------------------------------------------------------------------------
Zytel® 70GB30HSL NC010 30% Glass bead reinforced, heat stabilized PA66 resin for injection molding
7、Low Warp Resins
--------------------------------------------------------------------------------
Zytel® 70GB30HSL NC010 30% Glass bead reinforced, heat stabilized PA66 resin for injection molding
Zytel® FR70M30V0 BK010 30% Mineral reinforced, flame retardant, black polyamide 66 resin for injection molding
Zytel® FR70M30V0 NC010 30% Mineral reinforced, flame retardant polyamide 66 resin for injection molding
8、Low Wear and Friction Resins
--------------------------------------------------------------------------------
Zytel® 70G33GRA BK350 33% Glass fiber reinforced
Zytel® 70K20HSL NC010 Aramid-modified, heat stabilized, lubricated PA66 resin with excellent wear resistance.
Zytel® WRF101A NC010 Unreinforced lubricated PA 66 resin
Zytel® WRF403 NC010 30% Glass reinforced, heat stabilized PA66 resin containing Teflon® PTFE micropowder
Zytel® WRF500 NC010 Heat stabilized PA66 resin modified with Teflon® PTFE micropowder and Kevlar®.
9、Mineral Reinforced Resins
--------------------------------------------------------------------------------
Zytel® FR70M30V0 BK010 30% Mineral reinforced, flame retardant, black polyamide 66 resin for injection molding
Zytel® FR70M30V0 NC010 30% Mineral reinforced, flame retardant polyamide 66 resin for injection molding
10、Toughened Resins
--------------------------------------------------------------------------------
 
Zytel® 444AHS BK152 Toughened, heat stabilized, black polyamide 66 resin for injection molding. It is a high flow, processing friendly material
Zytel® 73G30T BK261 30% Glass fiber reinforced, toughened black polyamide 6 resin for injection molding
Zytel® 73G30T NC010 30% Glass fiber reinforced, toughened polyamide 6 resin for injection molding
Zytel® 75CG30HSL BK409 Polyamide resin modified with carbon fiber for improved structural performance.
Zytel® 75CG45HSL BK409 45% Glass and carbon fiber reinforced, toughened polyamide resin
Zytel® 8018HS BKB085 14% Glass reinforced toughened heat stabilized black nylon 66 resin
Zytel® 8018HS NC010 14% Glass reinforced toughened heat stabilized nylon 66 resin
Zytel® 80G14A NC010A 14% Glass fiber reinforced, toughened, high flow polyamide 66 resin. It offers outstanding performance in injection molding applications.
Zytel® 80G14AHS BK099 14% Glass fiber reinforced, toughened, high flow, heat stabilized, black polyamide 66 resin. It offers outstanding performance in injection molding applications.
Zytel® 80G14AHS NC010 14% Glass fiber reinforced, toughened, high flow, heat stabilized polyamide 66 resin. It offers outstanding performance in injection molding applications.
Zytel® 80G25HS BK117 25% Glass fiber reinforced, toughened, heat stabilized, black polyamide 66 resin for injection molding
Zytel® 80G33HS1L BK104 33% Glass fiber reinforced, heat stabilized black polyamide 66 resin with outstanding impact resistance developed using DuPont® Super Tough technology
Zytel® 80G33HS1L NC010 33% Glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont® Super Tough technology
Zytel® 80G33L NC010 33% Glass fiber reinforced polyamide 66 resin with outstanding impact resistance developed using DuPont® Super Tough technology
Zytel® 80G43HS1L BK104 43% Glass fiber reinforced, heat stabilized, black polyamide 66 resin with superior impact resistance
Zytel® 84G33 BKB031 33% Glass reinforced toughened black cube blended nylon 66 and nylon 6 comelt resin
Zytel® BM73G15THS BK317 15% Glass fiber reinforced, heat stabilized, lubricated, toughened polyamide 6 for blow molding
Zytel® CFE8005HS BK010 Blow moldable, Super Tough nylon 66 resin
Zytel® DMXST601H NC010 Super Tough nylon 66 resin with improved stiffness and excellent dimensional stability
Zytel® FE240012 BK010 Highly toughened, heat stabilized polyamide 612 for extrusion, blow molding or processing by other techniques requiring high melt viscosity.
Zytel® FE4200 BK136 Toughened, heat stabilized Nylon 66 resin for extrusion
Zytel® FN714 NC010A Very flexible, grafted ionomer modified nylon 66 resin
Zytel® FN718 NC010 Flexible, grafted ionomer modified nylon 66 resin
Zytel® FN727 NC010 Graft ionomer modfied nylon 6 resin. Flexible, nonplasticized.
Zytel® MT409AHS BK010 Medium Toughened, high performance, heat stabilized, black polyamide 66 resin having good stiffness and improved knit line strength with superior toughness and processability
Zytel® MT409AHS NC010 Medium Toughened, high performance, heat stabilized polyamide 66 resin having good stiffness, improved knit line strength, surface appearance with outstanding processability
Zytel® ST7301 BK356 Super Tough, heat stabilized, lubricated, black polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity
Zytel® ST7301 NC010 Super Tough, heat stabilized, lubricated polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity
Zytel® ST800HSL BK152 Heat stablized Super Tough black polyamide 66 resin. It offers outstanding impact resistance, high productivity and laser markability
Zytel® ST801A NC010A Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure.
Zytel® ST801AHS BK010 Super Tough, high performance, black polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
Zytel® ST801AHS NC010 Super Tough, high performance polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
Zytel® ST801AW BK195 Super Tough, weatherable, easy flow and processing friendly, black polyamide 66 resin for injection molding. It offers the best resistance to outdoor exposure.
Zytel® ST801AW NC010 Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored, offers the best resistance to indirect sunlight in automotive interior applications.
Zytel® ST811HS NC010 Rubber modified nylon 6 resin. Very flexible.
11、UV Resistant/Weatherable Resins
--------------------------------------------------------------------------------
Zytel® 105 BK010A Contains well dispersed carbon black to improve resistance to weathering; molding grade
Zytel® 145 BK010 Weather resistant, high flow , fast cycling, modified polyamide 66 resin with improved toughness. It was previously coded Zytel® FE3791 BK010.
Zytel® 157HSL BK010 Lubricated, heat stabilized, improved weather resistant molding/extrusion grade
Zytel® 74G33W BK196 A high gloss automotive weatherable black 33% glass reinforced nylon 66 and nylon 6 comelt resin.
Zytel® MT409AHS BK010 Medium Toughened, high performance, heat stabilized, black polyamide 66 resin having good stiffness and improved knit line strength with superior toughness and processability
Zytel® ST801AHS BK010 Super Tough, high performance, black polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
Zytel® ST801AW BK195 Super Tough, weatherable, easy flow and processing friendly, black polyamide 66 resin for injection molding. It offers the best resistance to outdoor exposure.
Zytel® ST801AW NC010 Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored, offers the best resistance to indirect sunlight in automotive interior applications.
 
12、Unreinforced Resins
--------------------------------------------------------------------------------
Zytel® 101 NC010 General purpose polyamide 66 resin for injection molding and extrusion
Zytel® 101F BKB009 Internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
Zytel® 101F NC010 Internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
Zytel® 101L BKB009 Lubricated polyamide 66 resin for injection molding
Zytel® 101L BKB080 Lubricated polyamide 66 resin for injection molding
Zytel® 101L NC010 Lubricated polyamide 66 resin for injection molding
Zytel® 103FHS BKB009 Heat stabilized, internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
Zytel® 103FHS BKB038 Heat stabilized, internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
Zytel® 103FHS NC010 Heat stabilized, internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
Zytel® 103HSL BKB080 Heat stabilized, lubricated polyamide 66 resin for injection molding
Zytel® 103HSL NC010 Heat stabilized, lubricated polyamide 66 resin for injection molding
Zytel® 105 BK010A Contains well dispersed carbon black to improve resistance to weathering; molding grade
Zytel® 122L NC010 Externally lubricated and stabilized to retard oxidation and hydrolysis in hot water; molding grade
Zytel® 132F BKB501 Nucleated, lubricated, black polyamide 66 resin for injection molding. It is suitable for fast cycling and high productivity applications.
Zytel® 132F NC010 Nucleated, lubricated polyamide 66 for injection molding. It is suitable for fast production cycles and high productivity applications
Zytel® 145 BK010 Weather resistant, high flow , fast cycling, modified polyamide 66 resin with improved toughness. It was previously coded Zytel® FE3791 BK010.
Zytel® 151L NC010 Lubricated, general purpose molding grade
Zytel® 153HSL NC010 Lubricated, heat stabilized, extrusion grade
Zytel® 157HSL BK010 Lubricated, heat stabilized, improved weather resistant molding/extrusion grade
Zytel® 158 NC010 General purpose PA 612 resin suitable for molding and extrusion applications
Zytel® 158L NC010 Lubricated, general purpose molding/extrusion grade -- a higher melt viscosity than Zytel® 151L NC010
Zytel® 159 NC010 High viscosity, extrusion grade
Zytel® 159L NC010 Lubricated, extrusion grade
Zytel® 330 NC010 Transparent nylon resin
Zytel® 42A NC010 High viscosity polyamide 66 resin for injection molding and extrusion applications such as film and tubing
Zytel® 444AHS BK152 Toughened, heat stabilized, black polyamide 66 resin for injection molding. It is a high flow, processing friendly material
Zytel® 45HSB NC010 High viscosity, heat stabilized polyamide 66 resin for injection molding and extrusion applications such as film and tubing
Zytel® 7301 NC010 General purpose, unlubricated polyamide 6 resin for extrusion applications.
Zytel® 7304 NC010 Medium viscosity, unlubricated polyamide 6 resin for extrusion applications.
Zytel® 7335F NC010 Nucleated, lubricated polyamide 6 resin for injection molding
Zytel® BM7300THS BK317 Unreinforced, PA6 blow molding resin
Zytel® CFE8005HS BK010 Blow moldable, Super Tough nylon 66 resin
Zytel® DMXST601H NC010 Super Tough nylon 66 resin with improved stiffness and excellent dimensional stability
Zytel® E51HSB NC010 High molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion
Zytel® FE2400 NC010 High viscosity polyamide 66/6 copolymer resin
Zytel® FE3071 NC010 Intermediate viscosity polyamde 66 resin for injection molding and extrusion
Zytel® FE3734 NC010 Internally lubricated PA 612 resin
Zytel® FE3757 NC010 Lubricated polyamide 66 resin modified for toughness, high flow and fast cycling.
Zytel® FE4200 BK136 Toughened, heat stabilized Nylon 66 resin for extrusion
Zytel® FN714 NC010A Very flexible, grafted ionomer modified nylon 66 resin
Zytel® FN718 NC010 Flexible, grafted ionomer modified nylon 66 resin
Zytel® FN727 NC010 Graft ionomer modfied nylon 6 resin. Flexible, nonplasticized.
Zytel® FR7025V0F NC010 Unreinforced, elemental phosphorous and halogen free
Zytel® FR7026V0F NC010 Unreinforced, elemental phosphorous and halogen free flame retardant PA66
Zytel® MT409AHS BK010 Medium Toughened, high performance, heat stabilized, black polyamide 66 resin having good stiffness and improved knit line strength with superior toughness and processability
Zytel® MT409AHS NC010 Medium Toughened, high performance, heat stabilized polyamide 66 resin having good stiffness, improved knit line strength, surface appearance with outstanding processability
Zytel® ST7301 BK356 Super Tough, heat stabilized, lubricated, black polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity
Zytel® ST7301 NC010 Super Tough, heat stabilized, lubricated polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity
Zytel® ST801A NC010A Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure.
Zytel® ST801AHS BK010 Super Tough, high performance, black polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
Zytel® ST801AHS NC010 Super Tough, high performance polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
Zytel® ST801AW BK195 Super Tough, weatherable, easy flow and processing friendly, black polyamide 66 resin for injection molding. It offers the best resistance to outdoor exposure.
Zytel® ST801AW NC010 Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored, offers the best resistance to indirect sunlight in automotive interior applications.
Zytel® ST811HS NC010 Rubber modified nylon 6 resin. Very flexible.
Zytel® WRF101A NC010 Unreinforced lubricated PA 66 resin
13、Glass Reinforced Resins
--------------------------------------------------------------------------------
Zytel® 70G13HS1L BK031 13% Glass fiber reinforced, heat stabilized, black polyamide 66 resin for injection molding
Zytel® 70G13HS1L NC010 13% Glass fiber reinforced, heat stabilized, polyamide 66 resin for injection molding
Zytel® 70G13L NC010 13% Glass fiber reinforced polyamide 66 resin for injection molding
Zytel® 70G25HSLR BK099 25% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G25HSLR NC010 25% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G30HSLR BK099 30% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G30HSLR NC010 30% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G30L NC010 30% Glass fiber reinforced polyamide 66 resin for injection molding.
Zytel® 70G33GRA BK350 33% Glass fiber reinforced
Zytel® 70G33HS1L BK031 33% Glass fiber reinforced, heat stabilized black polyamide 66 resin for injection molding
Zytel® 70G33HS1L NC010 33% Glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding
Zytel® 70G33L BK031 33% Glass fiber reinforced black polyamide 66 resin for injection molding 
Zytel® 70G33L NC010 33% Glass fiber reinforced polyamide 66 resin for injection molding
Zytel® 70G35HSL NC010 35% Glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding
Zytel® 70G35HSLRA4 BK267 35% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding. It has excellent flow characteristics.
Zytel® 70G43HSLA BK099 43% Glass fiber reinforced, heat stabilized, black polyamide 66 resin for injection molding.
Zytel® 70G43L NC010 43% Glass fiber reinforced polyamide 66 resin for injection molding
Zytel® 70G50HSLA BK039B 50% Glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding. It has excellent flow characteristics.
Zytel® 73G15HSL BK363 15% Glass fiber reinforced, heat stabilized, black polyamide 6 resin for injection molding
Zytel® 73G15L NC010 15% Glass fiber reinforced polyamide 6 resin for injection molding
Zytel® 73G30HSL BK416 30% Glass fiber reinforced, heat stabilized black polyamide 6 resin for injection molding
Zytel® 73G30HSL NC010 30% Glass fiber reinforced, heat stabilized polyamide 6 resin for injection molding
Zytel® 73G30L NC010 30% Glass fiber reinforced polyamide 6 resin for injection molding
Zytel® 73G30T BK261 30% Glass fiber reinforced, toughened black polyamide 6 resin for injection molding
Zytel® 73G30T NC010 30% Glass fiber reinforced, toughened polyamide 6 resin for injection molding
Zytel® 73G35HSL BK262 35% Glass fiber reinforced, heat stabilized, black polyamide 6 resin for injection molding
Zytel® 73G45L NC010 45% Glass fiber reinforced polyamide 6 resin for injection molding
Zytel® 73G45L NC010 45% Glass fiber reinforced polyamide 6 resin for injection molding
Zytel® 73G50HSLA BK416 50% Glass fiber reinforced, heat stabilized, lubricated, polyamide 6 resin for injection molding. It has an excellent surface appearance and gloss.
Zytel® 74G33W BK196 A high gloss automotive weatherable black 33% glass reinforced nylon 66 and nylon 6 comelt resin.
Zytel® 75LG40HSL BK031 40% Long Glass Reinforced PA66 Resin
Zytel® 75LG40L NC010 40% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 75LG50HSL BK031 50% Long Glass Reinforced PA66 Resin
Zytel® 75LG50L NC010 50% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 75LG60HSL BK031 60% Long Glass Reinforced PA66 Resin
Zytel® 75LG60L NC010 60% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 77G33HS1L NC010 33% Glass fiber reinforced, heat stabilized polyamide 612 resin for injection molding
Zytel® 77G33L BK031 33% Glass fiber reinforced, black polyamide 612 resin for injection molding
Zytel® 77G33L NC010 33% Glass fiber reinforced, polyamide 612 resin for injection molding
Zytel® 77G43L BK031 43% Glass fiber reinforced, black polyamide 612 resin for injection molding
Zytel® 77G43L NC010 43% Glass fiber reinforced polyamide 612 resin for injection molding
Zytel® 8018HS BKB085 14% Glass reinforced toughened heat stabilized black nylon 66 resin
Zytel® 8018HS NC010 14% Glass reinforced toughened heat stabilized nylon 66 resin
Zytel® 80G14A NC010A 14% Glass fiber reinforced, toughened, high flow polyamide 66 resin. It offers outstanding performance in injection molding applications.
Zytel® 80G14AHS BK099 14% Glass fiber reinforced, toughened, high flow, heat stabilized, black polyamide 66 resin. It offers outstanding performance in injection molding applications.
 
Zytel® 80G14AHS NC010 14% Glass fiber reinforced, toughened, high flow, heat stabilized polyamide 66 resin. It offers outstanding performance in injection molding applications.
Zytel® 80G25HS BK117 25% Glass fiber reinforced, toughened, heat stabilized, black polyamide 66 resin for injection molding
Zytel® 80G33HS1L BK104 33% Glass fiber reinforced, heat stabilized black polyamide 66 resin with outstanding impact resistance developed using DuPont® Super Tough technology
Zytel® 80G33HS1L NC010 33% Glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont® Super Tough technology
 
Zytel® 80G33L NC010 33% Glass fiber reinforced polyamide 66 resin with outstanding impact resistance developed using DuPont® Super Tough technology
Zytel® 80G43HS1L BK104 43% Glass fiber reinforced, heat stabilized, black polyamide 66 resin with superior impact resistance
Zytel® 84G33 BKB031 33% Glass reinforced toughened black cube blended nylon 66 and nylon 6 comelt resin
Zytel® BM70G15HSLR BK537 15% Glass fiber reinforced polyamide 66 for blow molding
Zytel® BM70G20HSLX BK537 20% Glass fiber reinforced polyamide 66 for blow molding
Zytel® BM73G15THS BK317 15% Glass fiber reinforced, heat stabilized, lubricated, toughened polyamide 6 for blow molding
Zytel® FE5355 BK031 33% Glass reinforced heat stabilized black nylon 612 resin
Zytel® FE5382 BK276 33% Glass fiber reinforced, heat stabilized, black polyamide 612 resin developed for electrical bobbins and encapsulation applications
Zytel® FE5555 BK538 35% Glass reinforced black polyamide 66 developed for encapsulation applications
Zytel® FR50 BK505 25% Glass reinforced, flame retardant black PA66
Zytel® FR50 NC010A 25% Glass reinforced, flame retardant PA66
Zytel® WRF403 NC010 30% Glass reinforced, heat stabilized PA66 resin containing Teflon® PTFE micropowder
14、Static Dissipative Resins
--------------------------------------------------------------------------------
Zytel® 75CG45HSL BK409 45% Glass and carbon fiber reinforced, toughened polyamide resin
15、Transparent/Translucent Resins
--------------------------------------------------------------------------------
Zytel® 330 NC010 Transparent nylon resin
16、Superstructural Resins
--------------------------------------------------------------------------------
Zytel® 75CG30HSL BK409 Polyamide resin modified with carbon fiber for improved structural performance.
Zytel® 75CG45HSL BK409 45% Glass and carbon fiber reinforced, toughened polyamide resin
Zytel® 75LG40HSL BK031 40% Long Glass Reinforced PA66 Resin
Zytel® 75LG40L NC010 40% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 75LG50HSL BK031 50% Long Glass Reinforced PA66 Resin
Zytel® 75LG50L NC010 50% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 75LG60HSL BK031 60% Long Glass Reinforced PA66 Resin
Zytel® 75LG60L NC010 60% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
17、Hydrolysis Resistant Resins
--------------------------------------------------------------------------------
Zytel® 122L NC010 Externally lubricated and stabilized to retard oxidation and hydrolysis in hot water; molding grade
Zytel® 70G25HSLR BK099 25% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G25HSLR NC010 25% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G30HSLR BK099 30% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G30HSLR NC010 30% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding
Zytel® 70G35HSLRA4 BK267 35% Glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding. It has excellent flow characteristics.
18、Long Fiber / Long Glass Resins
--------------------------------------------------------------------------------
Zytel® 75LG40HSL BK031 40% Long Glass Reinforced PA66 Resin
Zytel® 75LG40L NC010 40% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 75LG50HSL BK031 50% Long Glass Reinforced PA66 Resin
Zytel® 75LG50L NC010 50% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
Zytel® 75LG60HSL BK031 60% Long Glass Reinforced PA66 Resin
Zytel® 75LG60L NC010 60% Long glass reinforced, lubricated polyamide 66 resin for structural applications.
19、Fast Cycle Resins
--------------------------------------------------------------------------------
Zytel® 132F BKB501 Nucleated, lubricated, black polyamide 66 resin for injection molding. It is suitable for fast cycling and high productivity applications.
Zytel® 132F NC010 Nucleated, lubricated polyamide 66 for injection molding. It is suitable for fast production cycles and high productivity applications
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

公司主要经营:PPO|PC|PC/ABS|PBT|PPS|LCP|PA|PET|ASA|ABS|POM|TPR|PVC|AS|PS|PP|PE|TPU|EVA 
客服邮箱: [email protected]  客服电话:0769-87187027 传真:0769-87796540
公司地址:东莞市樟木头镇塑胶中心城D2号 Copyright © 2006 东莞同亿工程塑料有限公司 All Rights Reserved.
《中华人民共和国电信与信息服务业务经营许可证》编号:粤ICP备10055882号-2 您是第 访问者